Well, it works flawlesly at a certain point of view. The furnace out was connected to the recycling piping in where all air in the base was pumped back into my filtration system, the idear was to lead the furnace exhaust into this system and reuse these gasses.
Had a simulair idear, altough a bit saver as yours, to lead the exhaust of the furnace directly into the recycle system of my base, furnce placed in a pressurized room with max venting for toxic fumes. well that's not gonna happen anytime soon with 500☌ max. Also to dump the heat of the A/C in there. I really wanted to make a heat dump tower with that. So maybe there is a 500☌ heat limit structures? If anyone has different experiences with that please tell my.īTW: My experiments on that and further is on halt for the moment. But I managed to get to 500☌ at 500+☌ the first windows disappeared and everything was gone. I needed to depressure twice a little to avoid that the pressure goes over 200 kPa because of the increasing heat.
Don't worry the pipes are watched for overpressure and no pipe with gas is touching the vaccum otherwise I would loose heat slowly. So maybe there is the limit around this value.įor the second part of my experiment. But anyway, I blew up the room three times and 2 of those were well beyond 200 kPa. I wonder if maybe building it only out of solid steel frames might improved that. Correct? Or did anyone manged to have higher pressure in a room. Because feeding it directly from the O2/H2 main tanks via logic chips to hold the temperature is just a super-max waste of fuel.įirst think i noticed is max pressure: At around 200 kPa+ Windows/Wall's can't hold the pressure any longer in a room. The idea I had was: Dump all heat into a room with gas (Pollutants) to re-use the heat of the Furnace and maybe pre-heat it or better sustain the heat longer. I ask here if any of you can confirm this or that. with the Furnace and found out some values.
0 kommentar(er)
